Boekel-scientific 260010-2 MicroCooler II User Manual download pdf (Page 8)

8.2 Replacement of Fuses

There are two supply fuses located in the fuse drawer. To replace the fuses:

• Disconnect the unit from the power supply.

• Remove the plug from the socket in the back of the unit.

• Pull back on the fuse drawer (see Figure 2).

• Pull out the fuse drawer.

• Check and replace with the correct fuses if necessary. The fuses must be

5mm x 20mm quick acting, rated 250V.

Model 260010: 2AF

Model 260010-2: 1AF

• Push the fuse drawer back in. Reconnect unit to the power supply.

9. Warranty

When used in laboratory conditions and according to these operating instructions, Boekel

warrants this product to be free of defective material and workmanship for a period of

two years from the date of manufacture. The liability of Boekel for any defective

equipment during the warranty period shall be limited to the repair of such equipment or

replacement thereof without charge for parts or labor.

10. Service

A Returned Materials Authorization (RMA) number must be obtained before any Boekel

products are returned for any reason. A Decontamination Notice must be completed,

signed by the user, and returned to Boekel Scientific prior to receiving the RGA number.

Please be sure to mark the outside of the return goods package with this RGA number to

ensure prompt handling. For more detailed instructions please visit our Website:

www.boekelsci.com.

Boekel Scientific

855 Pennsylvania Blvd.

Feasterville, PA 19053

PHONE: (215) 396-8200 or (800) 336-6929

FAX: (215) 396-8264

Fuse

Drawer

Figure 2

1 2 3 4 5 6 7 8 9

No comments

Boekel-scientific 260010-2 MicroCooler II User Manual Page 8